manualshive.com logo in svg

Z Corporation Z402C, Руководство пользователя

Поделиться
Скачать
Z Corporation Z402C Скачать руководство пользователя страница 21

Z Corporation 

Z402C System User Manual 

2.10.1  RECOMMENDED SETUP PROCEDURE* 

1)  Select the Printer that you will be using. Choose ‘Select Printer’. You may choose any printer 

that is connected by serial port. If the Printer is busy or offline, the option to select this printer 
will not be available. 

2)  ‘Save Printer as Default’ enables you to save the chosen printer so that the software 

remembers to use the settings for this printer when the software is reopened.  

3)  Choose ‘Powder Type’ by clicking on the list box.  Save this powder type as the default 

powder so that the printer will remember to use this powder for every print job unless 
manually changed. If you would like to use a powder that is not the default, you may manually 
change powder type by choosing from the ‘Powder’ list box. 

 

 

PLEASE NOTE: *This is the recommended 3D Print Setup procedure. It is chronologically
structured to prevent any changes in values once they have been entered. 

 

 

2.10.2  CHANGING POWDER PARAMETERS 

The saturation settings for plaster-based powder are constant for all parts. Please refer to the Powder 
Fact Sheet for recommended saturation values.  

The default saturation values suggested by the software for starch-based powder are designed to 
successfully print a majority of parts. You may, from time to time, choose to override these saturation 
levels. Please refer to the Powder Fact Sheet for recommended saturation values.  

In general, bulkier parts will print more successfully with a lower setting and delicate parts will print 
better with a higher setting. 

To change Powder Parameters for the chosen powder: 

1. Click on the ‘Override…’ button.  

2.  Choose the unit of measure for layer thickness. 

20 

Z Corp Service (781)852-5050/(877)88-ZCORP

                                     

Содержание Z402C


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды