Z-Com VUS-100, Руководство пользователя

Страница: 13 / 47

Chapter 3 Basic Settings 12
Chapter 3 Basic Settings
Factory Default Settings
The VUS-100 is set to default values when you first use it. The following table demonstrates the
default settings of VUS-100, you can re-acquire these parameters by resetting the device. If
necessary, please refer to Restore Factory Default Settings .
Table 2 VUS-100 Factory Default Settings
Item Default Value
Device Name VUS-100
UPnP Disable
IP Address
192.168.1.1
Gateway IP 192.168.1.254
Subnet mask 255.255.255.0
Primary DNS 0.0.0.0
Second DNS 0.0.0.0
SSID any
Encryption Disabled
Output Power
Full
Security Auth-type Open System
Note:
Please reboot your VUS-100 after modifying its configuration, refer to Reboot for
how to reboot your device.
Utility & Web - Double Management Tools
VUS-100 provides you with two ways for management: Utility and Web . You can use either of them
to check and configure your USB storage settings.
Follow the steps below to start them:
Utility Management Tool