YZ Systems NJEX 8300G, Руководство пользователя, Страница: 65 / 126

YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5593 • F: 936.788.5720
Page 58
NJEX 8300 ver .092001 ATEX Rev.
SSSSS
ECTION ECTION ECTION ECTION ECTION
9: S 9: S
9: S 9: S
9: S
ETTING ETTING ETTING ETTING ETTING
& T & T
& T & T
& T
ESTING ESTING ESTING ESTING ESTING
A A
A A
A
LARMS LARMS LARMS LARMS LARMS
Setting The Clock
The internal clock in the N-300G should be maintained to
reflect the current local time and date. When a system is
first placed into service the clock should be set for local
time and date. This clock is a 24 hour, military time, clock
and therefore the hour of the day will be set between
00:00 and 23:59. It is important that this time and date be
correct as data logged will be reflected from this clock
setting. If daylight savings time, or other similar hour-shift
adjustment, is observed, these changes should be made
manually to the clock as they occur. Any change to the
clock will be logged in the Sentry4 data file.
Choose *Set in the main menu, figure 195 .
Choose *Cal in the set selection menu, figure 196 .
Choose *Clk in the calibration selection menu,
figure 197
.
To set the Clock,
figure 198,
press and release the
Select key. First, the numerical value for the Month will
begin flashing when chosen. Use the Up Arrow key to
increase the value and the Down Arrow key to de-
crease the value. When a new value has been chosen,
press the
Enter key to store the new Month into
memory. The entered value will stop flashing when it has
been loaded into memory, then the numerical
Day of the
month value will begin to flash. Use the Up Arrow key
to increase the value and the Down Arrow key to
decrease the value. When a new Day value has been
chosen, press the Enter key to store the new Day into
memory and the Day of The Week will begin to flash.
Use the Up Arrow key to increase the value and the
Down Arrow key to decrease the value. When a new
Day of the Week has been chosen, press the Enter key
to store the new Day of the Week into memory. Now
the Year value will begin to flash. Use the Up Arrow key
to increase the value and the Down Arrow key to
decrease the value. When a new Year has been
chosen, press the Enter key to store the new Year into
memory. The last two settings will be for the Hour of the
day and the minutes after the Hour . The Hour value will
begin to flash. Use the Up Arrow key to increase the
value and the Down Arrow key to decrease the value.
When a new Hour has been chosen, press the Enter
key to store the new Hour into memory. Last the
Figure 195
pmp bat vmtr sig tnk
PropFlow Idle
*Strt *Dsp *Set
pmp bat vmtr sig tnk
Set Selection
*Par *Cal *Esc
Figure 196
pmp bat vmtr sig tnk
Calibration Set
*Clk *Inputs *Esc
pmp bat vmtr sig tnk
Set Date and Time
12:07 07-12-Thu-2001
Figure 197
Figure 198