19
20
3
4
3. Place a new air filter onto the air filter cover;
4. Close the air filter cover.
Caution:
Make sure the air filter is fitted at all times to prevent water and dust from entering the device.
f
12.4 Reassembling:
After finishing all the cleaning steps, reassemble all these parts together. When the water tank and air
tube are dry, you can reassemble the parts.
y
Open the movable cover component and fill the distilled water into the water tank.
y
Close the movable cover component, and insert it into the side of the device.
y
Close the knob cover component and rotate it from
to
.
y
Connect the air tube firmly to the air outlet located on the top of the device.
y
Connect the free end of the air tube firmly onto the assembled mask.
13. Therapy data
BreathCare PAP records your therapy data for you and your care provider so they can view and
make changes to your therapy if required. The data is recorded and then transferred to your care
provider via a SD card.
1. Open the silica gel stopper at the left side of the device;
2. Push the SD card into the SD card connector;
3. Remove the SD card from the device after it wrote successfully.
Caution:
Don't use the interface of the mini USB, since it is reserved for the manufacture.
14. Traveling
You can take your device with you wherever you go. Just keep the following in mind.
y
Use the travel bag provided to prevent damage to the device.
y
Empty the water tank.
15. Trouble shooting
When your device has trouble, look for the following table to find solution. Contact your physician or
your provider if you cannot solve your problem. Do not try to open the device.
