15
16
⑥ Set Humidity Level
y
At clinical page, Highlight "Humidity Level".
y
Rotate the dial to the right or left, set your humidity level (0-6level, step value is 1 level).
y
After setting humidity level, highlight the "Back", press dial to back to home page.
Caution:
During your therapy, you can go to clinical menu by pressing dial and
at the same time. Section
11.2 clinical menu tells the method about how change all the parameters.
Mode
CPAP
Inital Pressure
4.0
Therapy Pressure
20.0
Unit
cmH20
Mode
APAP
Max Pressure
15.0
Min Pressure
4.0
4.0
Initial Pressure
Picture 6-1：Clinical menu (CPAP) Picture 6-2：Clinical menu (APAP)
12. Caring for your device
It is important that you regularly clean your device to make sure you receive optimal therapy. The
following sections will help you with disassembling, cleaning, checking, reassembling your device.
f
12.1 Disassembling
1
2
1. Pull the power connector out of device.
2. Hold the cuff of the air tubing and gently pull
it away from device.
3
4
3. Rotate the knob cover component from the
to
.
4. Pull the knob cover component out.
5
6
5. Press the water tank gently and pull it away
from the device.
6. Open the silica gel stopper and discard the
remaining water.
Notice:Close the silica gel stopper after the
water has been poured out.
