23
24
2. Entering the static mode
Press the '' '' button and hold, meanwhile
m
p oke the side reset key with the tool. Hold
on
the ''
m
''
for about 3 seconds then release
button. Then screen will show
the
pressure
the syste m has restored and entered the static
mode. Now can take the static test.
After entering the static mode, if the screen still doesn't show
'' '',
please operate again as
the system restore. Please contact with the
local distributor if it still does not work.
The monitor will automatically power off if there is no operation
in
4 minutes.
value
'' '' , the date and
time, mmHg. Now
Tips!
H M
Static mode
Common questions of blood Pressure measurement
About the blood pressure on wrist and upper-arm
D
iabetes, high blood lipids, hypertension will accelerate atherosclerosis and
cause nerve ending dysaemia.
The blood pressure on wrist and upper-arm
may
have a significant difference on these patients. Even if in unsuitable
conditions, healthy persons may cause about 20 mmHg( 2.6kPa) difference.
So
suggest do not diagnose by oneself, please consult the doctor. Normally,
we
the blood pressure on wrist and upper-arm are same. But circulatory system
disorders may have a significant difference. Please manage your blood
pressure with experts. Healthy persons have a
20 mmHg(2.6kPa) difference
between blood pressure on wrist and upper-arm.
About measuring posture
If wrist and heart are not at a same level, the blood pressure will change as
a
result of the weight of blood. When the wrist is higher than the heart, the
value measured will be lower, and vice-versa. Every 10cm about 8mmHg(1kPa)
difference. Of course the value is more closely related
to the measuring
posture.