21
22
Auxiliary measuring function
Cuff detection
If the cuff winded properly, it will show the
'' '' icon. Otherwise it will
show the ''
'' icon, then press the '' '' button to stop and wind
properly to measure again.
It will show the ''
'' icon, if body moves when measuring. Please measure
again or it will show inaccurate results.
Wrong operation indication
When the sphygmomanometer is in the correct position, it shows the " "
icon. When the sphygmomanometer is higher than the heart, it displays the
" " icon, please lower the sphygmomanometer height at this time
.
When
the sphygmomanometer is lower than the heart, it shows " " icon, Please
raise the sphygmomanometer at this time
.
Prompt for correct measurement of position
Static mode
This function is mainly for professional personnel to enter the static mode
to test the monitor through standard pressure gauge.
Warning: normal users don't need to know this function and also do not
operate.
The company will not take any responsibility for damage
caused by this operation.
Note: It must restore the system before entering the static mode,
otherwise it may cause inaccurate results.
1. System restores
Press the '' '' button, the screen will show the
'' '' icon,
which means
the system is in restore testing. Several seconds later, the ''
'' icon
indicates the test ended. Then press the '' '' button
to stop inflating
and take out the batteries to enter the next step.
disappears and the air
pump starts inflating at
the same time, which
If irregular pulse signal is detected during a measurement, it will flash the
'' '' icon. If it continues to appear during several measurements, we
recommend you to consult with and follow the directions of your physician.
Indication for irregular heartbeats