YUNEEC H520, Руководство пользователя

Страница: 90 / 115

•
Drag the opaque vertices on the map to the edge of the structure.
• If the structure footprint is more than a simple square, click the semi-transparent circles between the
vertices to create a new vertex. This allows for complex shapes such as the one seen above.
When flying a building, it is common to begin the flight at the top of the building to ensure all data and altitude
is properly set. This also prevents accidents as the aircraft begins its scan at the top, and works its way to the
bottom, allowing the pilot to take control in the event of misjudgment of height.
Configure the flight plan or KML import using the Structure Scan editor on the right hand side of the view. First
select whether a manual scan, a scan using a particular camera, or a scan using a custom camera definition is the
desired technique. The Structure Scan editor is pre-configured for all current Yuneec camera systems.
WARNING
Always be cognizant of bottom heights/altitudes when planning and executing a
structure scan mission. The aircraft will be flying vertically (sidesliding) to the
right as it operates the scan. Be aware of obstacles and minimal heights when
planning the mission.
90