Yuchai YC60-9 Скачать руководство пользователя страница 75

Страница: 75 / 154

4-6

Enter and exit machine

1) hold the door handrail on cabin door

tightly (arrow toward in the picture)

2) Step on crawler stably.

3) Do not use operator joystick as a

handrail for getting in or off the excavator.

4) If any mud, greasing oil on handrail or

crawler, there might be a risk of slipping.

Please clean handrail and crawler in

time.

5) Do not jump up or down the excavator.

While the excavator is moving, do not get

in or off the excavator.

6) If the operator planned to left the

machine, please low down the working

device to the ground and turn the safety

lever to locking position, shut down the

engine and keep the status to next

starting.

Attention: please take out the ignition

key and lock all door and window

before leaving the machine.

Do not climb to the top of engine hood

and cabin.

It is prohibited to stand on working device (for example bucket, arm, boom and

attachment at any circumstance.

Содержание YC60-9



























































































































































Результаты поиска

Содержание YC60-9

Отзывы:

Бренды по названию

Популярные бренды

Yuchai YC60-9, Руководство оператора

Результаты поиска

Содержание YC60-9

Отзывы:

Бренды по названию

Популярные бренды