Yuchai YC60-9 Скачать руководство пользователя страница 27

Страница: 27 / 154

2-13

Safety Operation

Warning: Do not transport or lift people by excavator. Do not hoist

heavy object like crane.

Warning: before working, please fasten safety belt, honk, and make

sure there is nobody in the working zone..

Starting machine

Safety rules for engine starting

1) Please honk before starting

engine

2) Don’t hitch any other

person on machine except

for operator.

3) It is only allowed to operate

the machine when sitting on

the seat.

4) Please don’t start engine by

shout circuit starting.

5) Please preheat the machine in cold weather

Warning: please do not starts engine when a warning board of

prohibiting is hung on joy stick.

After engine starting

The following items must be checked after the engine is
started.

1) Buckle up or not

2) Working device, dozer device, traveling, rotating and slewing device works

properly or not.

3) Noise, vibration, smell or instrument is normal or not

4) Check Engine oil or fuel leaking or not.

Содержание YC60-9



























































































































































Результаты поиска

Содержание YC60-9

Отзывы:

Yuchai YC60-9, Руководство оператора, Страница: 27 / 154

Результаты поиска

Содержание YC60-9

Отзывы: