Yuchai YC60-9 Скачать руководство пользователя страница 134

Страница: 134 / 154

5-33

3. Installation of Battery

1). Read the safety mark carefully before install the Battery, to prevent the

accidents.

2). Wipe a small amount of Vaseline on the end of connecting posts to prevent

corrupted. Connecting wires should be secure and reliable. Not tap on the end

of connecting posts to avoid the leaking.

3). The positive electrode of the charger should be connected with the positive

electrode of the battery, and the negative electrode of the charger is connected

to the negative electrode of the battery.

4). Fasten the Battery on the frame, avoid battery damaged due to loosening.

4. Maintenance of Battery

1). It has an indicator of Battery capacity on the cover, when it indicating green,

the battery for normal use. When it indicating black, the battery need to be

charged. When it indicating white, the battery need to be changed.

2). Please charge the battery in time when it lost electricity during use, to

prevent battery degradation due to sulfation.

3). Don’t overcharge the battery, to avoid battery failure earlier due to

excessive water loss, grid growth and lead paste shedding.

4). Please remove the battery from the machine and store in a ventilated and

dry place if the machine need to be park for a long time (more than15 days),

and check the battery termly (about 3-6 months), charge the battery if

necessary (if the indicator is black).

5). If there are any problems, please contact with YCUHAI distributor.

Содержание YC60-9



























































































































































Результаты поиска

Содержание YC60-9

Отзывы:

Похожие инструкции для YC60-9

Бренды по названию

Популярные бренды

Yuchai YC60-9, Руководство оператора

Результаты поиска

Содержание YC60-9

Отзывы:

Похожие инструкции для YC60-9

Бренды по названию

Популярные бренды