Yuchai YC60-9 Скачать руководство пользователя страница 67

Страница: 67 / 154

3-23

4.TU-/-- manual frequency setting, searching automatic, MP3 song selection,

play or pause

Radio status:

Shortly press this button, manual frequency setting downward; long press this

button, automatic searching frequency downward.

MP3 status:

Shortly press this button, play previous song; long press this button, play or pause

MP3 song.

Search MP3 song combined with Key-2(AMS/BAND)

5.TU+/RPT—manual frequency setting, searching automatic, MP3 song

selection, play or pause

Radio status:

Shortly press this button, manual frequency setting upward; long press this button,

automatic searching frequency upward.

MP3 status:

Shortly press this button, play next song; long press this button, “RPT”icon is

displayed on the radio screen, it means single song repeat playing; if the

“RPT”icon is not displayed, it means all song repeat playing.

Search MP3 song combined with Key-2(AMS/BAND)

6. CH-/-10---frequency selection, save and MP3 quick search.

Radio status:

Shortly press this button to select previous saved frequency.

Long press this button, enter into saving mode. The frequency number is twinkled,

then press key-7(CH+) or key-6(CH-) shortly to increase or decrease the frequency.

Or, long press key-7 or Key-6, select the frequency which will be saved, the

frequency will be saved automatically after 3 seconds.

MP3 status

10 songs backward from current song.

7. CH+/+10—f frequency selection, save and MP3 quick search

Radio status:

Shortly press this button to select next saved frequency.

Long press this button, enter into saving mode. The frequency number is twinkled,

then press key-7(CH+) or key-6(CH-) shortly to increase or decrease the frequency.

Or, long press key-7 or Key-6, select the frequency which will be saved, the

frequency will be saved automatically after 3 seconds.

MP3 status

10 songs forward from current song.

8. VOL+--volume increasing, function selection

Press this button to increase volume.

Long press this button to adjust volume continuously.

Function setting accompany by “SEL”button.

Search MP3 accompany by key-2(AMS/BAND)

9. VOL_--volume decreasing, function selection

Press this button to increase volume.

Long press this button to adjust volume continuously

Function setting accompany by “SEL”button.

Search MP3 accompany by key-2(AMS/BAND)

. SEL—function setting (accompany by key-8 VOL- and key-9VOL+)

Shortly press this button to select sound effect menu. Cycle switch

VOL—BASS—TEE—BAL, then use key-8 VOL- and key-9VOL+ to adjust value.

Содержание YC60-9



























































































































































Результаты поиска

Содержание YC60-9

Отзывы:

Бренды по названию

Популярные бренды

Yuchai YC60-9, Руководство оператора

Результаты поиска

Содержание YC60-9

Отзывы:

Бренды по названию

Популярные бренды