16
http://www.yowzafitness.com/
STEP5
ASSEMBLY
607
607
609
609
601
461
Step 5
463
601
607
609
607
609
E
461
Step 5-A
Step 5-B
Step 5-C
Step 5-D
Step 5-E
STEP5-A). First, put Button Control Panel (A1) on the Console Support Tube (A2),
then take off two M6x15mm Screws (463) from the Button Control Panel
(A1).
STEP5-B). Open the Panel like step B picture.
STEP5-C). Connect 8Pin Power Wire
– Upper (601) to the Panel, and connect 2 Pin
Hand Pulse Sensor Wire
– Lower (609) to 2 Pin Hand Pulse Sensor
Wire
–Upper(607)
STEP5-D). Use M6 Nylon Nut (461) to hold Button Control Panel (A1) on left and right
side by 13 &10 Combination Wrench (E)
461
X2
463
X2
