OPERATING & MAINTENANCE MANUAL MODEL : ELB series
YOUYANG AIRPORT LIGHTING EQUIPMENT INC. PAGE 15/34
4)
Make secondary connector kit connected with isolating transformer toward
outside.
5)
Lay down the light fixture on soft fabric and connect secondary lead wire plug of
the light
fixture with receptacle of the secondary cable of the isolating transformer.
(Refer to Figure 4.2)
6)
Clean the surface of the plug of lead wire of light fixture and receptacle of
isolating transformer
And do tightly taping with EPR tape and PVC isolation tape.
7)
Fill the surplus lead wire into the buried elbow conduit and fix the light fixture
with coupling by
fastening with three bolts. Make sure that power connection cable should be
well arranged without knot or twist.
8)
Finally check if the light fixture is completely installed and clean the
surroundings in work area.
9)
Make alignment for the installed light fixture with jig and leveling tools.
(Refer to section 3.5 : procedure of alignment of the light fixture)
