7
Attaching the End Sections
See Figure 4.
Insert the locator pins
See Figure 5.
Insert bolts and
tighten from in-
side the Crib Ends
Figure 4a.
Enlarged view
Figure 5.
Enlarged view
Figure 6.
Assembled ends to headboard
Step 2:
x
Insert the (2) metal locator pins in
the lower hole of the head board
post as shown in Fig 4a.
x
Support the headboard and attach
one end section to the headboard
by aligning the metal locator pin
in the headboard with the bottom
hole in the end section. (make
sure the mattress platform brack-
ets are to the inside of the crib).
See Fig 6.
x
Using (2)
2 3/8”
connector bolts,
attach the bolts from the inside of
the Crib Ends and tighten with the
provided wrench. See Fig 5.
x
Repeat for the remaining End
Section.
Wrench
2-3/8” Bolt
Locator Pin
