background image

11 

 

 

Cleaning: 

Mix together a mild solution of gentle dishwashing liquid and water, apply to the crib sur-
face using a soft clean cloth lightly dampened in the solution.  Rinse with clear water 
again using a soft clean cloth, then dry all surfaces thoroughly with a dry cloth.  NO 
ABRASIVE CLEANERS, SCOURING PADS, STEEL WOOL OR COURSE RAGS 
SHOULD BE USED TO CLEAN THIS FINE FURNITURE. 
 
 

Storage: 

A permanent storage pouch is attached to the mattress platform for the storage of the as-
sembly instructions.  After completing the assembly process, you are advised to read and 
be aware of all WARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND MAIN-
TENANCE notices contained in these instructions.  Do not place excess hardware in the 
storage pouch as it could present a danger to a child if retrieved and 

could

 also damage 

the mattress.  When storing the crib, use  CAUTION  as temperature changes and    hu-
midity could be harmful to the crib.  It is recommended that the crib be stored in a   tem-
perature controlled environment. 
 

Periodic Maintenance: 
 

1.  Periodically check to make sure all bolts and connections are fastened securely. 
2.  If you are missing a part or need a replacement part, do not substitute parts.  Ask your 

dealer for replacement parts or contact Customer Service at (800) 659-7297. 

3.  The crib allows for 2 mattress heights.  Move to the low position when the child can 

pull up to a standing position.  When the child reaches a height of 35” or can climb out 
of the crib you should place the child in a youth or regular bed. 

4.  Save these instructions in the event you disassemble the crib and need to reassemble it.  

These instructions will also be useful in identifying replacement parts if needed at a 
future date. 

Содержание Built to Grow Lyric BTG 2300

















Отзывы: