background image

15 

 

 

Converting to a Full Size Bed 

Step 1:  Disassemble the crib or toddler/day bed. 

x

Using the wrench provided remove the components in the following order: 

x

Remove the footboard 

x

Remove the mattress platform 

x

Remove the crib ends from the crib headboard 

x

Keep and store all the hardware for future assembly of the crib. Store the crib components in a safe 
dry place to prevent damage. 

Step 2:  Attach the side rails and slat roll. 

x

The side rails can be installed in two positions.  The lower position, along with the purchase of 
Safety Rails, is recommended for transition from the crib to a child’s first full size bed.  The bed 
side rails can be moved to the upper position after your child adapts to the transition.  Under bed 
storage options can be used with the bed rails positioned in the upper location. Contact your      

youngAmerica

 dealer for more information on available options. 

x

Install the rails into the headboard and foot board as shown and press down to lock into position. 

x

Insert (2) 

3/4”

 bolts in the headboard and (4) 

3/4” 

bolts in the footboard to cover the crib assembly 

holes.  Tighten with the wrench provided.  See Figure 15. 

x

Install the slat roll using the instructions provided with the slat roll for proper installation

Footboard 

Headboard 

Figure 15. 

Figure 15. 

See Figure 16. 

Figure 16. 

Slot in 
Headboard 

Hook 

See Figure 
 15. 

Содержание Built to Grow Lyric BTG 2300

















Отзывы: