13
Converting Your Crib to a Daybed
Steps to Convert Crib to a Daybed:
Step A:
x
The mattress should be in the low position. Follow the instruc-
tions on page 12 for lowering the Mattress Platform. Do not
reattach the footboard.
Step B:
x
Remove the (4) Bolts located in the End Frames: Locate the (4)
2 3/8” Inch Bolts using the illustration below. For each bolt,
gently apply pressure to the exposed threaded end of Bolt. This
will engage the threads of the Bolt with the Retainer Sleeve.
With pressure being applied, insert the provided Allen Wrench
into the opposite end and turn counter-clockwise.
Fully assembled Daybed
View from back of Daybed
Push to Gently
Apply pressure to
this end of Bolt.
Insert Allen
Wrench and
rotate counter-
clockwise.
Installing Bolt
Bolt properly seated
Installed Bolt
Step C:
x
Install (4) 3/4” Inch Bolts into the countersink holes where the 2 3/8” Inch Bolts were removed in Step
B. Insert the 3/4” Inch Bolts into the countersink holes. Using the provided Allen Wrench while gently
applying pressure, turn the Bolt in a clockwise motion. As the Bolt threads engage into the Bolt Retainer
sleeve, gently tighten until the Bolt seats with the Retainer Sleeve (See illustrations below).
Note: Do
not apply excessive force as the Bolt seats.
