manualshive.com logo in svg

York YZ MODEL A, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
York YZ MODEL A Скачать руководство пользователя страница 161

JOHNSON CONTROLS

161

APPENDIX - MATERIAL SAFETY DATA SHEETS

FORM 161.01-OM1 

ISSUE DATE: 6/8/2018

CEFSHP62 

Du Pont

 

Material Safety Data Sheet 

Page 7 

 

Printed on 03/09/2011 

          mammalian cell cultures or when tested in animals (not       
          tested for heritable genetic damage).                        
                                                                       
          HFC-134a                                                     
                                                                       

                   
            Inhalation 4-hour LC50:  567,000 ppm in rats               
                                                                       
          Single exposure caused: Cardiac sensitization, a potentially 
          fatal disturbance of heart rhythm associated with a          
          heightened sensitivity to the action of epinephrine.         
          Lowest-Observed-Adverse-Effect-Level for cardiac             
          sensitization: 75,000 ppm. Single exposure caused: Lethargy. 
          Narcosis.  Increased respiratory rates.  These effects were  
          temporary.  Single exposure to near lethal doses caused:     
          Pulmonary edema.  Repeated exposure caused: Increased        
          adrenals, liver, spleen weight.  Decreased uterine, prostate 
          weight.  Repeated dosing of higher concentrations caused:    
          the following temporary effects - Tremors.  Incoordination.  
                                                                       
          CARCINOGENIC, DEVELOPMENTAL, REPRODUCTIVE,MUTAGENIC EFFECTS: 
                                                                       
          In a two-year inhalation study, HFC-134a, at a concentration 
          of 50,000 ppm, produced an increase in late-occurring benign 
          testicular tumors, testicular hyperplasia and testicular     
          weight.  The no-effect-level for this study was 10,000 ppm.  
          Animal data show slight fetotoxicity but only at exposure    
          levels producing other toxic effects in the adult animal.    
          Reproductive data on male mice show: No change in            
          reproductive performance.  Tests have shown that this        
          material does not cause genetic damage in bacterial or       
          mammalian cell cultures, or in animals.  In animal testing,  
          this material has not caused permanent genetic damage in     
          reproductive cells of mammals (has not produced heritable    
          genetic damage).                                             
                                                                       
          HFC-143a                                                     
                                                                       
            Inhalation 4-hour LC50:  >540,000 ppm in rats              
                                                                       
          Single exposures by inhalation to 500,000 ppm caused         
          anesthesia but no mortality at 540,000 ppm.  Cardiac         
          sensitization occurred in dogs at 300,000 ppm following an   
          intravenous challenge with epinephrine.  Two, 4-week         
          inhalation have been conducted.  In the first study,         
          pathological changes in the testes were observed at all      
          exposure concentrations; no effects were observed in         
          females.  The testicular effect was considered related to    
          the method used to expose the rats to HFC-143a.  In the      
          second study using the same exposure concentrations, no      
          effects were noted in males at any concentration.  Data from 
          a 90-day study revealed no effects in male or female rats at 
          exposures up to 40,000 ppm.  Long-term exposure caused       

Print Date: 3 - 10 - 2011

Содержание YZ MODEL A











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды