York YR Скачать руководство пользователя страница 56

Страница: 56 / 110

JOHNSON CONTROLS

FORM 160.81-O1 (1020)

ISSUE DATE 10/05/2020

SECTION 2 - OPTIVIEW™ CONTROL CENTER

Optiview Control Center

USER SCREEN

Overview

This screen allows definition of custom User ID’s and

matching passwords. This allows the building admin-

istrator to assign custom passwords to those who are

authorized to maintain the chiller.
Each Custom User value is not linked to a specific

button. Instead, the

Change

button is pressed which

enables the cursor arrows which are used to highlight

the Custom User parameter the user wishes to modify.

At this point the ‘√’

(Check)

button is pressed and the

value may be entered.

Display Only

None

Programmable

System Language

Access Level Required:

OPERATOR

Allows the user to define the language for all screens.

The desired language is selected by scrolling through

the list of those available. English is the Default lan-

guage and is selected by pressing the s key when the

dialog box appears during the selection process. The

selected language will not be displayed until after

the user navigates from the USER screen to another

screen.

Data Display Mode

Access Level Required:

OPERATOR

Define the unit system (English or Metric) used by the

chiller display.

Custom User ID (4)

Access Level Required:

SERVICE

This allows the user to specify up to four (4) Custom

User ID values. Each User ID will then require a cor-

responding password and User Level. A User ID can

be defined for various maintenance personnel. Service

Technicians refer to OptiView Control Center Service

Instructions (Form 160.81-M1).

Custom User Password (4)

Access Level Required:

SERVICE

This allows the user to specify up to four (4) Custom

password values. Each password will then require a

corresponding User ID and User Level. Service Tech-

nicians refer to OptiView Control Center Service In-

structions (Form 160.81-M1).

FIGURE 19 - USER SCREEN

00343VIP

Содержание YR















































































































Результаты поиска

Содержание YR

Отзывы:

York YR, Руководство пользователя, Страница: 56 / 110

Результаты поиска

Содержание YR

Отзывы: