York YR Скачать руководство пользователя страница 17

Страница: 17 / 110

FORM 160.81-O1 (1020)

ISSUE DATE 10/05/2020

JOHNSON CONTROLS

SECTION 2 - OPTIVIEW™ CONTROL CENTER

SECTION 2 - OPTIVIEW™ CONTROL CENTER

INTRODUCTION

The YORK OptiView™ Control Center is a micropro-

cessor based control system for R134a screw chillers.

It controls the Leaving Chilled Liquid Temperature via

slide valve controls and has the ability to limit motor

current via control of the slide valve. Further, it is com-

patible with the YORK Solid State Starter (optional),

and Electro-Mechanical Starter applications.
The panel comes configured with a full screen LCD

Graphic Display mounted in the middle of a keypad

interface. The graphic display allows the presentation

of several operating parameters at once. In addition,

the operator may view a graphical representation of the

historical operation of the chiller as well as the present

operation. For the novice user, the locations of various

chiller parameters are clearly and intuitively marked.

Instructions for specific operations are provided on

many of the screens.
The graphic display also allows information to be rep-

resented in both English (temperatures in °F and pres-

sures in PSIG) and Metric (temperatures in °C and pres-

sures in kPa) mode. The advantages are most apparent,

however, in the ability to display many languages.
The Control Center continually monitors the system op-

eration and records the cause of any shutdowns (Safe-

ty, Cycling or Normal). This information is recorded

in memory and is preserved even through a power

failure condition. The user may recall it for viewing

at any time. During operation, the user is continually

advised of the operating conditions by various status

and warning messages. In addition, it may be config-

ured to notify the user of certain conditions via alarms.

A complete listing of shutdown, status, and warning

messages is attached in the

Display Messages

section

of this book.
There are certain screens, displayed values, program-

mable setpoints and manual controls shown in this book

that are for Service Technician use only. They are only

displayed when logged in at

SERVICE

access level

or higher. The setpoints and parameters displayed on

these screens are explained in detail in OptiView Con-

trol Center Service Instructions (Form 160.81-M1).

These parameters affect chiller operation

and should never be modified by anyone

other than a qualified Service Techni

cian. They are shown in this book for

reference only.

Advanced Diagnostics and Troubleshooting informa-

tion for Service Technicians are included in OptiView

Control Center Service Instructions (Form 160.81-

M1). Also included in the Service manual are detailed

descriptions of chiller features, such as the Refrigerant

Level Control, Hot Gas Bypass, Remote setpoints, and

Smart Freeze Protection.
The control center expands the capabilities of remote

control and communications. By providing a com-

mon networking protocol through the MicroGateway,

YORK Chillers not only work well individually, but

also as a team. This new protocol allows increased

remote control of the chiller, as well as 24-hour per-

formance monitoring via a remote site. In addition,

compatibility is maintained with the present network

FIGURE 3 - OPTIVIEW™ CONTROL CENTER

00565VIP

Содержание YR















































































































Результаты поиска

Содержание YR

Отзывы:

York YR, Руководство пользователя, Страница: 17 / 110

Результаты поиска

Содержание YR

Отзывы: