manualshive.com logo in svg

York YLAA, Руководство по эксплуатации, Страница: 9 / 64

Поделиться
Скачать
York YLAA Скачать руководство пользователя страница 9

FORM 150.72-EG6 (516)

JOHNSON CONTROLS

9

BRAZED PLATE EVAPORATOR

The compact, high efficiency Brazed Plate Heat Exchanger (BPHE) is constructed with 

316L stainless steel corrugated channel plates with a filler material between each plate.  It 

offers excellent heat transfer performance with a compact size and low weight, reducing 

structural steel requirements on the job site.  

LD18426

The heat exchanger is manufactured in a precisely controlled vacuum-brazing process 

that allows the filler material to form a brazed joint at every contact point between the 

plates, creating complex channels.  The arrangement is similar to older plate and frame 

technology, but without gaskets and frame parts.

Water inlet and outlet connections are 3” in diameter and are grooved for compatibility 

with field supplied ANSI/AWWA C-606 couplings.

A 20 mesh wye-strainer is provided as standard to provide protection at the evaporator 

inlet, particularly at system start-up when construction debris may be present in the piping 

system.

The evaporator is equipped with a thermostat-controlled heater. The heater provides 

freeze protection for the evaporator down to -20°F (-29°C) ambient. The evaporator is 

covered with 3/4” flexible, closed-cell, foam insulation (K=0.25).  

A factory-wired flow switch is standard, installed in a pipe section at the outlet of the 

evaporator.

Equipment Overview (Cont'd)

Содержание YLAA

































































Отзывы:

Нет отзывов