manualshive.com logo in svg

York YLAA, Руководство по эксплуатации, Страница: 11 / 64

Поделиться
Скачать
York YLAA Скачать руководство пользователя страница 11

FORM 150.72-EG6 (516)

JOHNSON CONTROLS

11

Equipment Overview (Cont'd)

Motors – 

The fans are driven by Totally Enclosed Air-Over, squirrel-cage type, current pro-

tected motors. They feature ball bearings that are double-sealed and permanently lu bricated.

UNIT CONTROL SYSTEM

The YLAA chiller is designed with an intelligent control system that operates the chiller 

automatically with maximum reliability, safety and ease of use.  The controls are factory 

tested and with as little user input as a chilled liquid setpoint the chiller will operate to meet 

the load demand. 

The control system includes native BACnet MS/TP, Modbus and N2 communications, with 

LON protocol served through an optional eLink communications card.

The operating program is stored in non-volatile memory (EPROM), so power failures and 

battery discharge will not require reprogramming the chiller.  Programmed setpoints are 

retained in lithium battery-backed RTC memory for five years minimum. 

Unit alarm contacts are standard.  Contacts for remote chilled liquid temperature reset 

and two steps of demand load limiting are also standard, for projects without BAS or for 

redundancy.

FUSES

ON/OFF 

SWITCH

TERMINAL

BLOCK

CONTROL

TRANSFORMER

MICROBOARD

KEYPAD

LD18429

LD18428

DISPLAY

Содержание YLAA

































































Отзывы:

Нет отзывов