York YLAA Скачать руководство пользователя страница 55

Страница: 55 / 64

FORM 150.72-EG6 (516)

JOHNSON CONTROLS

PART 1 – GENERAL

1.01 SCOPE

A. The requirements of this Section shall conform to the general provisions of the Con-

tract, including General and Supplementary Conditions, Conditions of the Contract,

and Contract Drawings.

B. Provide microprocessor-controlled, multiple-scroll compressor, air-cooled, liquid chill-

ers of the scheduled capacities as shown and indicated on the drawings, including but

not limited to:

1. Chiller package with zero ozone depletion potential Refrigerant R-410A

2. Electrical power and control connections

3. Chilled water connections

4. Manufacturer start-up

5. Charge of refrigerant and oil.

1.02 QUALITY ASSURANCE

Products shall be Designed, Tested, Rated and Certified in accordance with, and In

stalled in compliance with applicable sections of the following Standards and Codes:

1. AHRI 550/590 and 551/591– Water Chilling Packages Using the Vapor Compres-

sion Cycle

2. AHRI 370 – Sound Rating of Large Outdoor Refrigerating and Air-Conditioning

Equipment

3. ANSI/ASHRAE 15 – Safety Code for Mechanical Refrigeration

ANSI/ASHRAE 34 – Number Designation and Safety Classification of Refrigerants

5. ASHRAE 90.1 – Energy Standard for Buildings Except Low-Rise Residential Build-

ings

6. ANSI/NFPA 70 – National Electrical Code (N.E.C.)

7. ASME Boiler and Pressure Vessel Code, Section VIII, Division 1

8. OSHA – Occupational Safety and Health Act

9. Manufactured in facility registered to ISO 9001

10. Conform to Intertek Testing Services for construction of chillers and provide ETL/

cETL Listed Mark

Guide Specifications

Содержание YLAA

































































Результаты поиска

Содержание YLAA

Отзывы:

York YLAA, Руководство по эксплуатации, Страница: 55 / 64

Результаты поиска

Содержание YLAA

Отзывы: