![background image](http://html1.mh-extra.com/html/york/yhau-ce/yhau-ce_installation-operation-and-maintenance_3511378031.webp)
JOHNSON CONTROLS
31
SECTION 3 – HANDLING, STORAGE, INSTALLATION AND REASSEMBLY
FORM 155.35-ICOM2.EN.CE/GB (1018)
DATE: 10/30/2018
3
Do not splash water over the machine and its control
panel. Severe electric shock may result.
A warning label for electric shock is pasted at the con-
trol panel, solution pump, refrigerant pump, air purge
blower, and the terminal box of the vacuum pump mo-
tor. Prior to opening the terminal box, be sure to stop
the chiller-heater. Turn OFF the main circuit breaker
(MCB1). If not, electric shock may result.
USE OF GAS
If the smell of gas is present, do not operate the ma-
chine, touch the control panel or press any buttons until
the smell of gas is gone.
Inspect the exhaust duct periodically to check for gas
leaks.
Do not block the outer cover suction port or the exhaust
port. This can cause oxygen starvation.
EXHAUST GAS DAMPER
Exhaust gas dampers are not installed before ship-
ment. They must be installed at the site. See
for information on where to install the
dampers.
EXHAUST GAS TEMPERATURE SENSOR
Exhaust gas temperature sensors are not installed be-
fore shipment. They must be installed at the site. See
for information on where to
install the sensors.
Содержание YHAU-CE
Страница 10: ...JOHNSON CONTROLS 10 FORM 155 35 ICOM2 EN CE GB 1018 DATE 10 30 2018 THIS PAGE INTENTIONALLY LEFT BLANK...
Страница 14: ...JOHNSON CONTROLS 14 FORM 155 35 ICOM2 EN CE GB 1018 DATE 10 30 2018 THIS PAGE INTENTIONALLY LEFT BLANK...
Страница 84: ...JOHNSON CONTROLS 84 FORM 155 35 ICOM2 EN CE GB 1018 DATE 10 30 2018 THIS PAGE INTENTIONALLY LEFT BLANK...
Страница 126: ...JOHNSON CONTROLS 126 FORM 155 35 ICOM2 EN CE GB 1018 DATE 10 30 2018 THIS PAGE INTENTIONALLY LEFT BLANK...