York YCAS0130 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 204

York YCAS0130 Скачать руководство пользователя страница 2

2

YORK INTERNATIONAL

FORM 201.19-NM1 (204)

CHANGEABILITY OF THIS DOCUMENT

In complying with YORK’s policy for continuous prod uct improvement, the information contained in this
doc u ment is subject to change without notice. Literature updates that may occur will be printed on the
Revision Sheet and included with the Installation, Operation & Maintenance (IOM) man, which is provided
with new equipment. If not found with the manual, the current Revision Sheet containing any applicable
revisions, and the manual, can be found on the internet at www.york.com. The Renewal Parts (RP) manual
and revision sheet for this equipment can also be found at this internet site.

It is the responsibility of installing/operating/service personnel to determine prior to working on the equip-
ment, that they have all of the applicable literature, that it is current and that the equipment has not been
modi

fi

ed since manufacture.

Revision Sheets are available for
the IOM and Renewal Parts

Each update will be assigned a
sequential Rev. Level with the
date it was introduced

The Description/Change will explain
the change. If necessary it will
refer the reader to an additional
supplement or bulletin.

YORK part number for the Revision
Sheet to aid manufacturing and
distribution

Web address for the Revision Sheet

035-XXXXX-XXX

www.york.com

«
1
2
3
4
...
»

Содержание YCAS0130













































































































































































































Отзывы:

Нет отзывов