manualshive.com logo in svg

York MILLENNIUM YCAS0230, Установка, эксплуатация и обслуживание, Страница: 6 / 168

Поделиться
Скачать
York MILLENNIUM YCAS0230 Скачать руководство пользователя страница 6

6

YORK INTERNATIONAL

FORM 201.18-NM1 (102)

INTRODUCTION

YORK YCAS chillers are manufactured to the highest
design and construction standards to ensure high per-
formance, reliability and adaptability to all types of air
conditioning installations.

The unit is intended for cooling water or glycol solu-
tions and is not suitable for purposes other than those
specified in this manual.

This manual and the Microprocessor Operating Instruc-
tions contain all the information required for correct
installation and commissioning of the unit, together with
operating and maintenance instructions. The manuals
should be read thoroughly before attempting to operate
or service the unit.

All procedures detailed in the manuals, including in-
stallation, commissioning and maintenance tasks must
only be performed by suitably trained and qualified
personnel.

The manufacturer will not be liable for any injury or
damage caused by incorrect installation, commission-
ing, operation or maintenance resulting from a failure
to follow the procedures and instructions detailed in
the manuals.

WARRANTY

York International warrants all equipment and materi-
als against defects in workmanship and materials for a
period of one year from initial start-up, or eighteen
months from delivery (whichever occurs first) unless
extended warranty has been agreed upon as part of the
contract.

The warranty is limited to parts only replacement and
shipping of any faulty part, or sub-assembly which has
failed due to poor quality or manufacturing errors. All
claims must be supported by evidence that the failure
has occurred within the warranty period, and that the
unit has been operated within the designed parameters
specified.

All warranty claims must specify the unit model, serial
number, order number and run hours/starts. These de-
tails are printed on the unit identification plate.

The unit warranty will be void if any modification to the
unit is carried out without prior written approval from
York International.

For warranty purposes, the following conditions must
be satisfied:

• The initial start of the unit must be carried out by

trained personnel from an Authorized YORK Ser-
vice Center. See Commissioning, page 37.

• Only genuine YORK approved spare parts, oils and

refrigerants must be used. Recommendations on
spare parts can be found on page 159.

• All the scheduled maintenance operations detailed

in this manual must be performed at the specified
times by suitably trained and qualified personnel.
See Maintenance Section, page 155.

• Failure to satisfy any of these conditions will auto-

matically void the warranty. See Warranty Policy,
page 163.

SAFETY

Standards for Safety
YCAS chillers are designed and built within an ISO
9002 accredited design and manufacturing organization.
The chillers comply with the applicable sections of the
following Standards and Codes:

• ANSI/ASHRAE Standard 15, Safety Code for Me-

chanical Refrigeration

• ANSI/NFPA Standard 70, National Electrical Code

(N.E.C.)

• ASME Boiler and Pressure Vessel Code, Section

VIII Division 1

• ARI Standard 550/590-98, Centrifugal and Rotary

Screw Water Chilling Packages

In addition, the chillers conform to Underwriters Labo-
ratories (U.L.) for construction of chillers and provide
U.L./cU.L. listing label.

GENERAL CHILLER INFORMATION & SAFETY

General Chiller Information & Safety

Содержание MILLENNIUM YCAS0230









































































































































































Отзывы:

Нет отзывов