manualshive.com logo in svg

York D835, Руководство пользователя, Страница: 5 / 78

Поделиться
Скачать
York D835 Скачать руководство пользователя страница 5

5

GLOBAL

INDUSTRIES, INC.

Drag Conveyors 

  10230011

2016-06-14

warranty

 Warranty

Global Industries Inc.

 (the 

Company

) makes the following warranty to the initial 

retail purchaser of its products (the 

Customer

).

 

MATERIALS and WORKMANSHIP:

 

The Company warrants products manufactured by it to be free from defects in 

materials and workmanship in normal use and service for a period of one (1) year 

after date of delivery to the Customer.

 

COMPANY’S OBLIGATION and 

 

CUSTOMER’S EXCLUSIVE REMEDY:

 

The Company’s sole obligation and the Customer’s exclusive remedy under this 

warranty is as follows:

If within one (1) year after delivery to the customer the product fails to function properly 

due to a defect in either materials or workmanship, the Company will at its option, either 

repair the defective part or replace the defective part with a new or reconditioned part. 

Labor charges for removing defective parts and installing replacement parts, shipping 

charges with respect to such parts, and applicable sales and other taxes, if any, shall 

not be covered by this warranty.

 

CONDITIONS, LIMITATIONS, AND EXCLUSIONS:

 

There are no warranties or merchantability or fi tness for a particular purpose

 

with respect to any product manufactured or sold by the Company. Motors provided 

by the Company are in most instances warranted by the manufacturer thereof and 

are not warranted by the Company. The Company shall not be responsible under 

this warranty or otherwise for personal injury or for 

Incidental or Consequential 

Damages,

 including, without limitation, loss of use and lost profi ts. This warranty 

does not apply to defects or damages caused by misuse, improper maintenance, 

or improper installation of the Company’s product or any equipment attached to or 

used in connection with the Company’s product. The Company reserves the right 

to make changes or improvements to its products without incurring any obligation 

with respect to previously manufactured products. Field modifi cation of this product 

without the expressed written permission of the Company constitutes a misuse of 

the product. The Company shall have no liability under this warranty until payment 

in full for the product in question has been made by the customer. The foregoing 

is the sole warranty made by the Company. No one is authorized to make other 

warranties on behalf of the Company.

Содержание D835















































































Отзывы:

Нет отзывов