18
YORK INTERNATIONAL
FIG. 11
KEYPAD PROGRAMMING HOLIDAY
SETPOINT
FIG. 12
KEYPAD PROGRAMMING REMOTE
RESET TEMP RANGE
LD00961
LD00962
To Enter
HOLIDAY
Setpoint: (Refer to Fig. 11.)
1. Press and release
HOLIDAY
setpoint key. The fol-
lowing program prompt message is displayed:
S_ M_ T_ W_ T_ F_ S_ HOLIDAY NOTED BY *
2. Press and release
ADVANCE DAY/SCROLL
key to
move cursor to the day that you wish to designate
as a holiday.
3. Press and release * entry key. An * will appear next
to the selected day.
4. After you have placed an * next to each of the days
that you wish to designate a holiday, press
ENTER
key
PROGRAM MODE, SELECT SETPOINT
message is displayed.
To cancel all of the designated holidays: perform
Step 1, press
CANCEL
key, and then press
ENTER
key.
PROGRAM MODE, SELECT SETPOINT
message is displayed.
To cancel one of the designated holidays: perform
Step 1, press
ADVANCE DAY / SCROLL
key until
the cursor appears to the right of the desired day,
press the * key, then press the
ENTER
key.
To Enter
REMOTE/ RESET TEMP RANGE
Setpoint:
(Refer to Fig. 12.)
1. Press and release
REMOTE/RESET TEMP RANGE
setpoint key. The following program prompt message
is displayed:
REMOTE TEMP SETPOINT RANGE = XX °F
2. Use
Entry
keys desired value (10 or 20).
3. Press and release
ENTER
key.
PROGRAM MODE, SELECT SETPOINT
message is displayed.
To Enter
DATA LOGGER
Setpoint:
Refer to Form 160.49-N2 for operation of this key.
