background image

 

BFE Warranty Policy – November 1

st

 2013 

1.

 

When purchased from an authorised BFE distributor the BFE warranty shall guarantee that all framework and components 

of your product are free from faulty manufacture. All faulty framework and components will be repaired or replaced as set 

out in this policy. All warranties in this policy apply to 

INDOOR HOME/DOMESTIC USE ONLY.

 

2.

 

These warranties do not apply to products used in commercial use applications.   

3.

 

Warranty 

DOES NOT 

cover normal wear & tear and excludes faults due to misuse, abuse, incorrect assembly or lack of 

general maintenance.   

4.

 

Warranty is applicable to products sold and placed within Australia only. 

5.

 

IMPORTANT

. Most of BFE products are pretested and we have inspectors checking all products prior to shipment. The 

number one reason for a fault is due to 

INCORRECT ASSEMBLY.

 

If you do have problems please go back to the start and double check your assembly and pay special attention to all 

WIRING

 connections. If you have accidently cut or damaged the wiring please let us know and we will be happy to send you 

a new set at no-charge. 

If you have done this and are confident you have double checked your assembly and are still having problems please email 

our service department at 

[email protected]

    including your best contact details ,proof of purchase, serial 

number and a brief explanation of what is wrong. 

Emailing is the quickest and most reliable way to get your service request processed. Once we have your details we will 

either call or email you back with the next steps. The quickest way, once we determine the problem and send you a 

replacement part, is that we can talk you through over the phone on how to fit it. 

If it is deemed by our service tech that it is too difficult, we can arrange (where available) a service technician.   

NOTE. 

  If we arrange for a service technician ( where applicable) and it is found that it is not a manufactures fault and 

found to be an assembly issue , normal wear and tear, transport damage or misuse then there will be a call out fee of $140 

depending on location. (Surcharge applies for non-metro areas)     

WARRANTY TERMS

- Warranty commences from the date of purchase from the retail store. Warranty only applies to the original 

purchaser and is NON transferable. Warranty is void if the serial number of the product has been removed or tampered with. 

Warranty does not apply to defects, faults or failures due to: 

(a)

 

Defects caused during assembly or failure to assemble to the assembly manual provided. Assembly errors include but are 

not limited to damaged wiring harness, stripped crank arms and or pedals and bolts used in the wrong locations. 

(b)

 

Lack of general maintenance and or failure to service or maintain the equipment in accordance with the user manual 

specifications and recommendations.   

(c)

 

Power Surges

. The computers, control boards and motors are very sensitive to power fluctuations. You must use a surge 

protector on all items that plug into your mains power otherwise your electronics will not be covered by this warranty. You 

can purchase these from numerous retailers or you can call us on 07 3272 7010 to get a price. 

(d)

 

User negligence, abnormal or excessive use, misuse, abuse or transport damage. 

(e)

 

Repairs, alterations or modifications by NON BFE authorised service technician. 

(f)

 

Accident, fire, flood or malicious damage by third person. 

(g)

 

Ordinary wear and tear. 

(h)

 

Failure to keep the product in a clean, dry environment causing rust. You should wipe off any sweat and moisture after 

each training session.   

(i)

 

Any products sold or placed in an application or the incorrect environment that is not recommended by BFE or as not 

stipulated in the owner’s manual such as a commercial / rental environment will void the warranty set forth by BFE 

(j)

 

BFE recommends the use of a protective rubber floor mat. This reduces the incidence of dust and lint collection around the 

motor, reduces noise & protects your floor. You can purchase this from your retailer or contact BFE directly at 

[email protected] 

18 

Содержание Performance YRK53116A




















Отзывы: