page
20 of
This device stores the last 9 sets temperature measurements. I
f you want to get memory data,
please following the below to get it.
1)
At turning on status, press the
“
”
button, to
enter the memory query mode and the
LCD will display the memory icon and first group of measurement data .
2)
press the
“
”
button repeatedly to switch a series of measurement data, memory
number will start from 1, 2,3,... .
3) Memory mode is automatically exited by turn off the device or you can press “
”
button to enter the measurement mode.
Note: When the memory data is over 9 groups, the system will replace the oldest set.
The abnormal body temperature results cannot be stored too (such as Lo, Err or Hi).
All memory values will be deleted after the battery is removed.
9.6 Switch
℃
and
℉
This device is shipped with Celsius(
℃
)temperature scale activated. If you wish to switch to
Fahrenheit(
℉
) and/or back from Fahrenheit to Celsius, proceed as follows:
Power on the device, remove the battery cover, move the “Unit switch button” to switch
the unit between
℃
and
℉
, the LCD will display the selected unit.
On power off status, move the “Unit switch button” can also switch the unit between
℃
and
℉
, after power on the device, the LCD will display the selected unit.
9.7 Power off
If no operation after 10s
±
2s, the system will be switch itself off and LCD will be blank.
Under the circumstance of displaying the Bluetooth pairing code, if no operation after 120
±
10s, the system will be switch itself off and LCD will be blank.
