page
16 of
Make sure that the probe and the ear canal are clean. As the ear canal is slightly
curved, please pull the ear slightly backwards before inserting the probe.This is
important so that the probe can be pointed directly at the eardrum.
4) Press the “
” button for 1second then release the button,about 1 second later, the
measured value will be appeared on the display with a “bi---” sound
(If the buzzer sound
is turned on)
.
5) Take out the device from the ear for reading the result, the measurement result remains
on LCD for 3 seconds, then the “
”signal will be displayed on the LCD , you can
make further measurement now.
If you need to make another measurement, repeat the steps above.
Important note!
The thermometer designed with 12Y-down mode and 12Y-up mode, 12Y-down mode is
used to measure the body temperature of people aged 12 and below, 12Y-up mode is used
to measure the body temperature of people over 12 years old.
LCD display
means the current mode is 12Y-down mode,
LCD display
icon means
the current mode is 12Y-up mode. According to the age of the subjects, if your first
measurement use the wrong mode, please withdraw the value, and
press the
“
”
button
to select the correct mode, then perform a new measurement.
Warnings
- The ear measurement shall not be taken in an ear affected by inflammatory disease (e.g.
discharging pus or secretion), after possible ear injuries (e.g. eardrum damage) or in the
healing period after operative procedures. In all of these cases, please consult your doctor.
- External factors may influence ear temperatures, including when an individual has:
Been laying on ear or other
Had their ears covered
