YOKOGAWA YS1000 Series, Руководство пользователя

Страница: 34 / 60

3-3
IM 01B08D02-02EN
Adjusting Direct Inputs (T
emperature/Resistance/Frequency)
3
(2) Press the [ENT] software key again. This writes the data to the SC card,
causing the display to return to normal display. If any key other than the [ENT]
software key is pressed, the communication data returns to normal display
without being written to the SC.
4) SC setting operation
• SC setting is made as follows:
(1) Selecting the SC menu
Press the [MNU] software key to read out and display the SC menus. Each
time the [MNU] software key is pressed, the model, tag number, and self-
check results are displayed in turn. Further pressing the [MNU] key causes
the display item, setting item, and adjustment items to be changed and
displayed cyclically.
Model
Tag number
Self-check results
Display item
Setting item
Adjustment item
[MNU] [MNU] [MNU] [MNU] [MNU] [MNU]
0501E.ai
(2) To select the display item, setting item, or adjustment item, further select a
setting item.
Press the [PRM] software key to read out and display the SC setting item.
Each time the [PRM] software key is pressed, the setting items are displayed
in turn. The parameters to be displayed change depending on the SC card;
see the items in the list of displayed items. Press the [PRM] software key until
the setting item you wish to set appears.
(3) Using the [→] software key (cursor movement) and the [ ] (data increase) or
[ ] (data decrease) software keys, set the setting item.
(4) Press the [ENT] software key. This causes the setting item to be highlight
displayed.
(5) Press the [ENT] software key again. This writes data to the SC card, causing
the display to return to the normal display.
Pressing any key other than the [ENT] software key causes the display to
return to the normal display without writing data.
Communication Status Display
Comment Display Status
COMMUNICATING Communicating with an SC card (normal communication)
COMMUN. ERR Communications error
OPERATION ERR Incorrect data sending
COMMAND ERR Incorrect command reception
3.1 List of Direct Input Specifications and Basic Operations