YOKOGAWA YS1000 Series, Руководство пользователя

Страница: 32 / 60

3-1
IM 01B08D02-02EN
Adjusting Direct Inputs (T
emperature/Resistance/Frequency)
3
3.1 List of Direct Input Specifications and Basic
Operations
In the SC Setting Display, communication with the direct input cards, optional
specifications, is made to set or adjust the input specifications.
Examples of sensor type setting, burnout setting, input zero adjustment, and span
adjustment procedures are described in sections 3.2 to 3.4. Other items are also set in
the same way. The table below shows a list of setting items.
No.
Name
Display
Description
Model-basis Data Display
/A01 /A02 /A03 /A04 /A08
01 MODEL Model EM1*C ET5*C ER5*C ES1*C EP3*A
02 TAG NO.
Tag number 16 alphanumeric characters
03 SELF CHK Self-check results GOOD or ERROR
A00 DISPLAY Display item -- -- -- -- --
A01 INPUT Input value [ ][ ][ ].[ ][ ]mV [ ][ ][ ][ ].[ ]degC [ ][ ][ ].[ ]degC
[ ][ ][ ][ ][ ].[ ]
OHM
[ ][ ][ ][ ]Hz
A02 OUTPUT Output value [ ][ ][ ].[ ]%
A03 STATUS Status FF
A04 REV NO. Revision number n.000 (n: Revision number)
B00 SET Setting item -- -- -- -- --
B01 TAG NO1
Tag number 1 8 alphanumeric characters (8 first-half characters of a tag number)
B02 TAG NO2 Tag number 2 8 alphanumeric characters (8 latter half characters of a tag number)
B03 COMMENT1 Comment 1 8 alphanumeric characters (8 first-half characters of comment)
B04 COMMENT2 Comment 2 8 alphanumeric characters (8 latter half characters of comment)
B05 INP TYPE ER5 input type -- --
PT/JPT/
PT100-90/
PT50 (Note 1)
-- --
B06 INP TYPE ET5 input type -- B/E/J/K/T/R/S/N -- -- --
B07 LOW CUT Low cutoff -- -- -- --
[ ][ ][ ][ ]Hz
(Note 5)
B08 RESIST ES1 total resistance -- -- --
[ ][ ][ ][ ][ ].[ ]
OHM
--
B09 UNIT
Temperature unit
(Note 8)
-- degC/degF/K degC/degF/K -- --
B10 ZERO Zero point [ ][ ][ ].[ ][ ]mV [ ][ ][ ][ ].[ ]degC [ ][ ][ ].[ ]degC
[ ][ ][ ][ ][ ].[ ]
OHM
[ ][ ][ ][ ]Hz
(Note 5)
B11 SPAN Span (Note 2) [ ][ ][ ].[ ][ ]mV [ ][ ][ ][ ].[ ]degC [ ][ ][ ].[ ]degC
[ ][ ][ ][ ][ ].[ ]
OHM (Note 4)
[ ][ ][ ][ ]Hz
(Note 5)
B12 BURN OUT Burnout OFF/UP/DOWN OFF/UP/DOWN OFF/UP/DOWN OFF/UP/DOWN --
C00 ADJUST Adjustment item -- -- -- -- --
C01 OUT 0%
0% output correction
(Note 7)
±10.00
C02 OUT 100%
100% output
correction (Note 7)
±10.00
C03 WIRING R Burnout correction (Note 3) EXECUTE/RESET EXECUTE/RESET -- -- --
C04 ZERO ADJ
Input zero adjustment
(Note 6)
[ ][ ][ ].[ ][ ][ ]mV
RST/INC/DEC
[ ][ ][ ].[ ][ ][ ]mV
RST/INC/DEC
[ ][ ][ ].[ ][ ][ ]
OHM
RST/INC/DEC
-- --
C05 SPAN ADJ
Input span adjustment
(Note 6)
[ ][ ][ ].[ ][ ][ ]mV
RST/INC/DEC
[ ][ ][ ].[ ][ ][ ]mV
RST/INC/DEC
[ ][ ][ ].[ ][ ][ ]
OHM
RST/INC/DEC
-- --
C06 ZERO ADJ
Input zero adjustment
(Note 6)
-- -- --
[ ][ ][ ].[ ][ ][ ]
OHM
--
C07 SPAN ADJ
Input span adjustment
(Note 6)
-- -- --
[ ][ ][ ].[ ][ ][ ]
OHM
--
Chapter 3 Adjusting Direct Inputs (Temperature/Resistance/Frequency)