YOKOGAWA YewSeries 80 STED Style S, Руководство пользователя

Страница: 42 / 54

7-2
IM 01B04J01-02E
7.1 Action in Fault Condition.
The output condition and error codes (BRAIN communication parameters) in fault condition
are shown in the table below.
• STATUS is displayed in A54 of A:DISPLAY (display), and SELF CHK is displayed in
60 of each item.
• STATUS error code is to be the addition display (hexadecimal number) when two
errors or more occur.
Handy Terminal Display Output Condition Description of Error Remedy
STATUS SELF CHK Error Information
(*1)
Same state as power off
Output: 0% or less
Pushing button
：
Disable
Communication ： Undefined
Hardware failure Contact YOKOGAWA's sales
office or sales representative. Power supply failure,
Fuse broken
0001 ERROR EEPROM ERROR Output: 0% or less
Pushing button: Disable
Communication
：
Undefined
EEPROM error
0002 ERROR EEPROM SUM
ERROR
Output: 0% or less
Pushing button: Disable
Communication ： Undefined
Parameter error
1000 ERROR AD ERROR Output: 0% or less
Pushing button: Disable
Communication ： Normal action
A/D conversion error
0080 ERROR RJC ERROR Output: (*2)
Pushing button: Enable
Communication
：
Normal action
RJC sensor error Replace RJC or check
terminal (ambient)
temperature.
0008 ERROR INPUT OVER
RANGE
Output: Normal action
Pushing button: Enable
Communication ： Normal action
Excessive input, out of
-25 to 125%
Set the input within the range.
(*3)
0010 ERROR RANGE SET
ERROR
Output: Normal action
Pushing button: Enable
Communication ： Normal action
INPUT1 L_RNG and
INPUT1 H_RNG are
same values.
Set INPUT1 L_RNG or
INPUT1 H_RNG again.
0040 GOOD None Output: Normal action
Pushing button: Enable
Communication
：
Normal action
Check power failure
during operation
Write "0000" at the STATUS
display on the Handy
Terminal.
0000 GOOD None Output: Normal action
Pushing button: Enable
Communication ： Normal action
- -
*1: Displayed when calling

60: SELF CHK .
*2: Once you run the unit under a reference junction temperature of -20°C or 80°C, run it per
the burnout settings.
If the burnout setting is UP or DOWN, run the unit such that the input value runs out in
the set direction and outputs according to that input value.
Operation while the burnout setting is OFF results in undefined.
*3: If errors continue even when the input is within the range, the input circuit is broken.
Contact YOKOGAWA's sales office or sales representative.