manualshive.com logo in svg

YOKOGAWA WT3000E, Руководство пользователя, Страница: 91 / 256

Поделиться
Скачать
YOKOGAWA WT3000E Скачать руководство пользователя страница 91

5-22

IM WT3001E-51EN

Note

•  This instrument supports only a single client.
•  When this instrument is accessed from the PC or workstation (login), 

 is displayed in the 

upper left corner of the screen.

•  The FTP server function cannot be used under the following cases.

•  When this instrument is accessing a PC or workstation on the network (FTP client 

function, see section 5.3).

•  When this instrument is outputting to a network printer (LPR client function, see section 

5.3).

•  When this instrument is performing file operations (see chapter 9 in the 

User’s Manual 

IM WT3001E-01EN

).

•  The PC card, USB storage, and network drive are displayed as [PC_Card], [USB], and [ND0], 

respectively, at the root directory of the PC or workstation accessing this instrument.

•  The log list is cleared when the power is turned OFF.
•  When using the FTP server function, set the TCP/IP parameters according to section 5.2, 

“Setting the Ethernet Interface (TCP/IP).”

•  To apply new settings, this instrument must be power cycled.

5.6  Accessing this instrument from a PC or Workstation (FTP Server Function)

Содержание WT3000E

































































































































































































































































Отзывы:

Нет отзывов