manualshive.com logo in svg

YOKOGAWA WT3000E, Руководство пользователя, Страница: 167 / 256

Поделиться
Скачать
YOKOGAWA WT3000E Скачать руководство пользователя страница 167

9-12

IM WT3001E-51EN

Frequency Measurement

Item

Specifications

Measurement range

45 Hz ≤ f ≤ 1 MHz

Measurement Function

Item

Specifications

Display update

Depends on the PLL source
(Approximately 200 ms when the frequency of the PLL source is 45 Hz to 66 Hz.)

Functional Limitations

Item

Specifications

Display

Waveform display, trend display, bar graph display, vector display, waveform computation display, 

and FFT display are not allowed.

Auto range

Not allowed

Averaging

Moving average is not allowed. Only exponential averaging is available, and the attenuation 

constant is fixed to the value as defined by the IEC standard.

Data update interval

Depends on the PLL source

Voltage/Current mode

Not selectable. The LED is OFF.

Peak measurement

Not allowed

User-defined function

Not allowed

MAX hold

Not allowed

Efficiency computation

Not allowed

Compensation

Efficiency compensation is invalid.

Integration

Not allowed

Store

Not allowed

File save

Waveform and waveform sampling data (Acquisition) are not allowed

NULL

Not allowed

Synchronized measurement Not allowed
Motor evaluation function

Not allowed

Print

Auto print is not allowed.

Delta computation

Not allowed

E-mail transmission

Not allowed

Measurement Functions

For a description of the measurement functions of IEC harmonic measurement mode 
and how they are determined, see section 7.11.
Measurement is not allowed for measurement functions related to the functions above 
that have limitations. For a list of measurement functions that cannot be measured, see 
appendices 10 and 11 in the 

User’s Manual IM WT3001E-01EN

.

9.6  IEC Harmonic Measurement Specifications

Содержание WT3000E

































































































































































































































































Отзывы:

Нет отзывов