YOKOGAWA WT3000E Скачать руководство пользователя страница 134

Страница: 134 / 256

7-31

IM WT3001E-51EN

Harmonic Measurement in Normal Measurement Mode (Option)

Index

• Changing the Element

Press the

Element

soft key to display the element selection box.

Press the

cursor keys

to select any of the elements/wiring units starting with

Element1.

10.

Press

SET

. The bar graph of the selected element number is displayed.

• Selecting the Number of Split Windows for the Bar Graph

11.

Press

FORM

to display the Bar Form menu.

If the bar graph is displayed at the lower section of the screen on the split display, press

SHIFT+FORM (LOWER FORM).

12.

Press the

Format

soft key to display the Bar Format menu.

13.

Press any of the keys from

Single

Triad

to select the number of windows.

•  If Single is selected, the bar graph of Bar Item No. 1 is displayed.
•  If Dual is selected, the bar graphs of Bar Item No. 1 and 2 are displayed.
•  If Triad is selected, the bar graphs of Bar Item No. 1 to 3 are displayed.

• Setting the Display Range of the Bar Graph

(The difference between the start order and the end order must be greater than or

equal to 10.)

• Setting the Start Order

14.

Press the

Start Order/End Order

soft key to set the cursor key target to Start

Order.

15.

Press the

cursor keys

to set the start order of the bar graph.

• Setting the End Order

14.

Press the

Start Order/End Order

soft key to set the cursor key target to End

Order.

15.

Press the

cursor keys

to set the end order of the bar graph.

7.9 Displaying the Bar Graph and Making Cursor Measurements

Содержание WT3000E

































































































































































































































































Результаты поиска

Содержание WT3000E

Отзывы:

YOKOGAWA WT3000E, Руководство пользователя, Страница: 134 / 256

Результаты поиска

Содержание WT3000E

Отзывы: