YOKOGAWA F3YP14-0N, Руководство пользователя

Страница: 21 / 127

2-6
IM 34M6H55-02E 1st Edition : Apr 1, 2002-00
2.8 Attaching and Detaching Modules
T T T T
Attaching/Detaching Modules
Figure 2.1 shows how to attach the module to the base module. First, hook the anchor
slot at the bottom of the module to be attached onto the anchor pin on the bottom of the
base module. Push the top of the module towards the base module until the yellow
button clicks into place.
Figure 2.1 Attaching/Detaching Modules
CAUTION
Always switch off the power before attaching or detaching a module.
CAUTION
Do not bend the connector pins on the rear of the module by force during the above
operation. If the module is pushed with improper force, the connector pins may bend
causing an error.
T
T T
T
Detaching Modules
To remove the module from the base module, reverse the above operation:
Press the yellow button on the top of the module to unlock it, and tilt the module away
from the base module. Then lift the module off the anchor pin at the base.
Base module
This module
Anchor pin
29FG01.VSD