YOKOGAWA DTSXL, Руководство пользователя, Страница: 193 / 289

< PART – B Software >
B-110
IM 39J06B40-01EN 14th Edition: May 30, 2022
5
Deflate Select whether to transmit compressed gzip files or uncompressed plain text
files.
TIP
If one of the following occurs when Since Selection is set to Transmit Files, DTSX3000 can’t start to
convert measured data into LAS formatted files and can’t start to transmit the files. Please reselect
another transmission file at the restart.
- The file to be selected is not found.
- The remaining space of the file storage area is below 30M bytes and no more than 10 files are to
be selected starting with the oldest file.
In this case, the following message is output to the application log:
“SN=xxxxxx file couldn’t transmit. Please set another transmission file at the restart.”
Where “xxxxxx” is the serial number of the file which failed to be transmitted.
If one of the following occurs except for the above condition, transmission will start with the file which is
midway between the newest and the oldest file.
- The file to be transmitted is not found.
- The remaining space of the file storage area is below 30M bytes and no more than 10 files are to
be transmitted starting with the oldest file.
In this case, the following message is output to the application log:
“SN=xxxxxx file transmits failed. Transmit files from SN=yyyyyy.”
Where “xxxxxx” is the serial number of the file which failed to be transmitted, and “yyyyyy” is the serial
number of the file with which transmission will start.
SEE ALSO
- For details on Transmit Files, see the above table “4.Transmit Files.”
- For details on how to display the application log, see Subsection B11.3.2, “Application Log File.”
- For details on serial numbers, see Subsection B8.4.2, “File Name Structure.”