Appendix
App-3
IM 701730-17E
App
Error in Communication Execution (200 to 299)
Code
Message
Action
Reference Page
221
Setting conflict.
Check the relevant setting.
Chapter 5
222
Data out of range.
Check the setting range.
Chapter 5
223
Too much data.
Check the data byte length.
Chapter 5
224
Illegal parameter value.
Check the setting range.
Chapter 5
241
Hardware missing.
Check availability of options.
—
260
Expression error.
Equation is not allowed.
—
270
Macro error.
Does not conform to the macro function specified in
—
IEEE488.2.
272
Macro execution error.
Does not conform to the macro function specified in
—
IEEE488.2.
273
Illegal macro label.
Does not conform to the macro function specified in
—
IEEE488.2.
275
Macro definition too long.
Does not conform to the macro function specified in
—
IEEE488.2.
276
Macro recursion error.
Does not conform to the macro function specified in
—
IEEE488.2.
277
Macro redefinition not allowed.
Does not conform to the macro function specified in
—
IEEE488.2.
278
Macro header not found.
Does not conform to the macro function specified in
—
IEEE488.2.
Error in Communications Query (400 to 499)
Code
Message
Action
Reference Page
410
Query INTERRUPTED.
Check transmission/reception order.
4-2
420
Query UNTERMINATED.
Check transmission/reception order.
4-2
430
Query DEADLOCKED.
Limit the length of the program message including
4-2
<PMT> to 1024 bytes or less.
440
Query UNTERMINATED after
Do not enter any query after
*IDN?
and
*OPT?
.
—
indefinite response.
indefinite response
Error in System Operation (912)
Code
Message
Action
Reference Page
912
Fatal error in the communication driver.
Servicing is required.
—
Warning (50)
Code
Message
Action
Reference Page
50
*OPC/?
exists in message.
Place the
*OPC
or
*OPC?
at the end of the program
—
message.
Other Errors (350)
Code
Message
Action
Reference Page
350
Queue overflow.
Read the error queue. Code 350 occurs when the error
6-5
queue is full up. This message is output only for the
:STATus:ERRor?
query and is not displayed on the screen.
Note
Code 350 indicates overflow of error queue. This code is returned as a response to the
":STATus:ERRor?"
query; it does not appear on the screen.
Appendix 2 Error Messages