YOKOGAWA Datum Y XL100, Руководство пользователя

Страница: 27 / 51

26 IM XL120P
8. Connecting to the Power Supply and
Turning the Power Switch ON/OFF
Connecting the Power Supply
Be sure to also read the precautions in section 3.6, “Connecting the Power
Supply” in the User’s Manual when connecting the power supply.
WARNING
• Use only the power cord and AC adapter supplied by YOKOGAWA Meters &
Instruments for the XL100.
• Check that the power source voltage matches the supply voltage rating (100
to 240 VAC), and then connect the power cord.
Connecting the AC Adapter
Follow the steps below to connect the AC adapter.
1. Check that the power switch is OFF.
2. Connect the AC adapter to the AC adapter jack of the XL100.
3. Connect the plug of the power cord supplied with the AC adapter to the
power connector of the AC adapter.
4. Connect the other end of the power cord to the power outlet that meets the
power rating (requirements).
Power supply rating of the AC adapter
Supply voltage rating 100 to 240VAC
Allowable supply voltage range 90 to 264 VAC
Power supply frequency rating 50/60 Hz
2. Connect.
3. Connect.
4. Connect.
1. Check that the power is OFF.
AC adapter
AC adapter jack
Power cord