38
IM XL120P
11.
Confirming the Settings and Performing
the Measurement
When you are done with the settings, press
HOME
to switch to Free Running
Mode and check the settings.
The figure below shows the display that appears when the XL100 is configured
as explained in section chapter 9, “Setting the Input Channel” and 10, “Setting
the Data Save Operation.”
Check whether the displayed values are correct. If the measured values are not
correct, switch back to Setting Mode, and check that the input settings are
correct. If the measured values are not correct even though the input settings
are correct, see chapter 14, “Troubleshooting.”
If the CF Card icon is gray, the save destination is not set to the CF card.
Sampling interval CF card icon
Measured
value
Scale upper limit
Scale lower limit
TIP
• To switch to a display other than waveform & digital display, press DISPLAY to
show the display switch pop-up menu, select the display using the arrow keys, and
press SELECT. (The steps are explained in page 22.)
• Press TIME/DIV to switch the time axis (the time per grid (division)).
• Press RANGE to change the input range or span (scale).
Содержание Datum Y XL100
Страница 48: ...47 IM XL120P W waveform 12 Web server 19 Index...
Страница 49: ...48 IM XL120P Memo...
Страница 50: ...49 IM XL120P Memo...
Страница 51: ...50 IM XL120P Memo...