YOKOGAWA Datum Y XL100, Руководство пользователя

Страница: 12 / 51

11 IM XL120P
An icon shown when the data save destination is set to SD card and the
memory full operation is set to DELETE. The icon blinks when there is access
to the SD card. (Supported only on the XL121, XL122, and XL124.)
An icon shown when the data save destination is set to SD card, the save
mode is set to DIVISION, and the memory full operation is set to REPEAT.
The icon blinks when there is access to the SD card. (Supported only on the
XL121, XL122, and XL124.)
An icon shown when the data save destination is set to SD card, the save
mode is set to DIVISION, and the memory full operation is set to DELETE.
The icon blinks when there is access to the SD card. (Supported only on the
XL121, XL122, and XL124.)
An icon shown when there is data saved in the backup memory. The icon
blinks when there is access to the backup memory. The icon is gray when
there is no data saved to the backup memory.
An icon shown when the interface is set to LAN, LAN/RS-232, or LAN/RS-485. For
other cases, the icon is gray. (Supported only on the XL121, XL122, and XL124.)
An icon shown when the interface is set to USB. For other cases, the icon is gray.
(Supported only on the XL121, XL122, and XL124.)
An icon shown when the communication protocol is set to Modbus (slave).
The icon is gray when set to Modbus (master). (Supported only on the XL121,
XL122, and XL124.)
An icon shown when the communication protocol is set to Modbus (master).
The icon is gray when set to Modbus (slave). (Supported only on the XL121,
XL122, and XL124.)
An icon shown when the printer output is turned ON and the sampling interval
is greater than or equal to 1 minute. The icon is gray when the printer output
is OFF. (Supported only on the XL121, XL122, and XL124.)
An icon shown when the printer output is turned ON and the sampling interval
is less than or equal to 30 seconds. This indicates that only manual print is
valid using the SAVE key. (Supported only on the XL121, XL122, and XL124.)
An icon shown when the display update is held. The icon is gray when the
display is not held.
An icon shown when key lock is enabled. The icon is gray when key lock is
disabled.
An icon shown when the AC adapter is connected.
An icon shown when the AC adapter is not connected, and the XL100 is
running on a battery. Shows the remaining battery power using four levels
( → → → ).
4. How to View the Display