Making Preparations for Measurements
2-1
IM CA700-02EN
1
2
3
4
5
6
App
Index
2.1 Handling Precautions
Safety Precautions
If you are using this instrument for the first time, make sure to read “Safety Precautions” on pages vii
and viii.
Do Not Remove the Case
Do not remove the case from the instrument. Some parts of the instrument use high voltages and
are extremely dangerous. For internal inspection and adjustment, contact your nearest YOKOGAWA
dealer.
Unplug If Abnormal Behavior Occurs
If you notice smoke or unusual odors coming from the instrument, immediately turn off the power and
remove the batteries. Then, contact your nearest YOKOGAWA dealer.
Operating Environment and Conditions
This instrument complies with the EMC standard under specific operating environment and operating
conditions. If the installation, wiring, and so on are not appropriate, the compliance conditions of the
EMC standard may not be met. In such cases, the user will be required to take appropriate measures.
General Handling Precautions
Do Not Place Objects on Top of the Instrument
Never place objects such as other instruments or objects that contain water on top of the instrument.
Doing so may damage the instrument.
Do Not Subject the Inputs to Mechanical Shock
Applying shock to the input connectors, probes, etc., can cause electrical noise to enter the instrument
through the signal lines.
Do Not Damage the LCD
Because the LCD is very vulnerable and can be easily scratched, do not allow any sharp objects near
it. Also, the LCD should not be exposed to vibrations or shocks.
Remove the Batteries during Extended Non-Use
Remove the batteries.
Chapter 2
Making Preparations for Measurements
Содержание CA700
Страница 14: ...xii...
