YOKOGAWA CA450 Скачать руководство пользователя страница 18

Страница: 18 / 84

4. Operation

4.1 Precautions before Measurement

■ Checking the Contents of the Package

After receiving the product and opening the package, check the items described below.
If the wrong items have been delivered, if items are missing, or if there is a problem with
the appearance of the items, contact your nearest YOKOGAWA dealer.

■ Operation and Storage Precautions

CAUTION

• When inserting the batteries into the instrument, refer to section 7., “Replacing the

Batteries.”

• There is a blank cover on the upper part of the back casing.
Only remove it when connecting the USB adapter of the communication package (sold

separately).

• Do not use the instrument near devices that produce high levels of noise or in areas

subject to sudden changes in temperature. Doing so may result in unstable readings
and errors.

Cleaning

• Do not wipe the instrument using benzine, paint thinner, or any other solvent

(chemical).

Doing so may lead to discoloration and other problems. Use a dry cloth to clean the

instrument.

Storage

• Do not leave the instrument exposed to direct sunlight or in a hot and humid location,

such as the inside of a vehicle, for a significant length of time.

• If you do not intend to use the instrument for a significant period of time, remove its

batteries.

Содержание CA450




















































































Результаты поиска

Содержание CA450

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA CA450, Руководство пользователя

Результаты поиска

Содержание CA450

Отзывы:

Бренды по названию

Популярные бренды