manualshive.com logo in svg

YOKOGAWA AQ6373, Руководство пользователя, Страница: 76 / 358

Поделиться
Скачать
YOKOGAWA AQ6373 Скачать руководство пользователя страница 76

5-8

IM AQ6373-01EN

5.3  Sub Scale

Procedure

The level scale is displayed based on relative values when a differential waveform (based 
on LOG values) or normalized waveform is displayed. A level scale based on relative 
values is called a sub scale. 

Displaying the Sub Scale 

Following section 6.5, “Displaying MATH Waveforms” or section 6.6, “Normalized 
Display,” you can select a display waveform of differential or normalized. 

 

 

 

Automatic Scaling of the Sub Scale 

1.

  Press LEVEL. The soft key menu for vertical axis settings appears. 

2.

  Press the MORE 1/2 soft key. The soft key menu for the sub scale appears. 

3.

  Press the AUTO SUB SCALE OFF ON soft key to select ON. 

Setting the Sub Scale REF Position

1.

  Press LEVEL. 

2.

  Press the MORE 1/2 soft key. 

3.

  Press the SUB REF LVL POSITION soft key. The REF position setting screen is 

displayed. 

4.

  Enter a value using the rotary knob, arrow keys, or numeric key pad. 

Note

The sub scale is displayed when a differential waveform (based on LOG values) and 
normalized waveform are displayed. When these waveforms are displayed over a waveform 
based on absolute values, the absolute value scale is shown on the left and the relative value 
scale is shown simultaneously on the right. If the left scale (main scale) is changed to LOG (8 
DIV) or linear (10 DIV), the sub scale is displayed to correspond to the DIV count on the main 
scale.

Содержание AQ6373







































































































































































































































































































































































Отзывы:

Нет отзывов