YOKOGAWA AQ6373 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 358

YOKOGAWA AQ6373 Скачать руководство пользователя страница 3

IM AQ6373-01EN

Foreword

Thank you for purchasing the AQ6373 Optical Spectrum Analyzer. This instrument
enables high speed measurement of the optical properties of LD and LED light sources,
and other devices. To improve ease of use, it includes mouse-based user operation and
a brand-new zoom function.
This user’s manual describes the instrument’s functions, operating procedures, and
handling precautions, and provides other important information for use of the instrument.
For correct operation, please read this manual thoroughly before use. After reading this
manual, keep it in a convenient location for quick reference in the event a question arises
during operation. There are two manuals for the AQ6373 including this one. Read them
along with this manual.

Manual Title

Manual No.

Description

AQ6373 Optical

Spectrum Analyzer User’

s Manual

IM AQ6373-01EN

This manual. The manual is located on the CD

included in your package (pdf format). Explains

all functions and operating procedures of the

AQ6373 except remote control and program

functions.

AQ6370C/AQ6373/

AQ6375 Optical

Spectrum Analyzer

Remote Control User’s

Manual

IM AQ6370C-17EN

The manual is located on the CD included

in your package (pdf format).Explains

functions for controlling the instrument with

communication commands and program

functions.

AQ6373 Optical

Spectrum Analyzer

Getting Started Guide

IM AQ6373-02EN

Explains instrument handling precautions and

basic operating procedures.

Notes

• The contents of this manual are subject to change without prior notice as a result

of improvements in the instrument’s performance and functions. Display contents
illustrated in this manual may differ slightly from what actually appears on your screen.

• Every effort has been made in the preparation of this manual to ensure the accuracy

of its contents. However, should you have any questions or find any errors, please
contact your nearest YOKOGAWA dealer.

• Copying or reproducing all or any part of the contents of this manual without the

permission of Yokogawa Meters & Instruments Corporation is strictly prohibited.

• A warranty sheet is included. It cannot be reissued. After reading the sheet, keep it in

a safe location.

Trademarks

• Microsoft and Windows are trademarks or registered trademarks of Microsoft

Corporation in the United States and/or other countries.

• Adobe, Acrobat, and PostScript are trademarks or registered trademarks of Adobe

Systems incorporated.

• The company and product names used in this manual are not accompanied by the

trademark or registered trademark symbols(TM,

®

)

• Other company and product names are trademarks or registered trademarks of their

respective companies.

Revisions

• 1st Edition:

January 2011

• 2nd Edition:

August 2013

2nd Edition : August 2013 (YMI)
All Rights Reserved, Copyright © 2011 Yokogawa Meters & Instruments Corporation

«
1
2
3
4
5
...
»

Содержание AQ6373







































































































































































































































































































































































Отзывы:

Нет отзывов