IM 1E10C1-E
4-4
4. BASIC OPERATING PROCEDURES
• The procedure of returning from the Setting Mode to the Flow Rate Display
Mode by using infrared switch on the converter is described as follows.
SET SHIFT INC
Switch Operation
Display
Description
The number changing mode of the Setting Mode.
After all settings have been completed, touch the SET key
simultaneously while touching the SHIFT key. Then the display
goes back to the Flow Rate Display Mode.
(example)
(SHIFT key first)
• Additional information on the functions of the keys is described here.
(1) Functions of
SHIFT
key
When the SHIFT key is touched in the Number Changing Mode, it shows as follows.
<< The Cursor Position moves alternately by touching the
SHIFT key.
(2) Functions of
INC
key
The INC key in the Number Changing Mode has each working at each cursor position.
a) In case the Cursor Position is at upper figure
The parameter number changes the followings by touching the INC key.
b) In case the Cursor Position is at lower figure
The parameter number changes from small number to big one by touching the INC key.
For example; 02, 03, ..., 37, 02, 03, ... (in case of parameters with “b”)
Cursor Position
Cursor Position
Number
Changing Mode
SET SHIFT INC
Number
Changing Mode
SET SHIFT INC
