YOKOGAWA ADMAG AXF Series, Руководство пользователя

Страница: 84 / 109

IM 01E20F02-01E A-25
APPENDIX 4. LINK MASTER FUNCTIONS
A4.3 Transfer of LAS
There are two procedures for an LM to become the
LAS:
• If the LM whose value of [V(ST)
⫻
V(TN)] is the
smallest on a segment, with the exception of the
current LAS, judges that there is no LAS on the
segment, in such a case as when the segment has
started up or when the current LAS has failed, the
To set up an AXF as a device that is capable of
backing up the LAS, follow the procedure below.
NOTE: When changing the settings in an AXF, add the
AXF to the segment in which an LAS is running.
After making changes to the settings, do not turn off
the power to the AXF for at least 30 seconds.
(1) Set the node address of the AXF. In general, use
an address from 0x10 to [V(FUN) - 1].
Not used
LM device
Not used
Basic device
Default address
Portable-device address
V (FUN)
V (FUN) + V (NUN)
V (NUN)
0xFF
0xFC
0xFB
0xF8
0xF7
0x00
FA0403.EPS
0x0F
0x10
0x13
0x14
Bridge device
Figure A4.3 Node Address Ranges
(2) In the LAS settings of the AXF, set the values of
V(ST), V(MRD), and V(MID) to the same as the
respective lowest capability values in all the
devices within the segment. An example is shown
below.
Sub-
index
Element AXF
Device
1
Device
2
Device
3
Description
1
3
6
SlotTime
MaxResponse
Delay
MinInterPdu
Delay
4
3
4
8
6
8
10
3
12
20
5
10
Capability value
for V(ST)
Capability value
for V(MRD)
Capability value
for V(MID)
TA0401.EPS
DlmeBasicInfo (AXF Index 361 (SM))
In this case, set SlotTime, MaxResponseTime, and
MinInterPduDelay as follows:
Subindex Element
ConfiguredLinkSettingsRecord (AXF Index 369 (SM))
Description
Setting
(Default)
V (ST)
V (MRD)
V (MID)
20
6
12
(4095)
( 5)
( 12)
SlotTime
MaxResponseDelay
MinInterPduDelay
1
3
6
TA0402.EPS
(3) In the LAS settings of the AXF, set the values of
V(FUN) and V(NUN) so that they include the
node addresses of all nodes within the same
segment. (See also Figure 3.)
Subindex Element
ConfiguredLinkSettingsRecord (AXF Index 369 (SM))
Description Default Value
V (FUN)
V (NUN)
0x25
0xBA
FirstUnpolledNodeId
NumConsecUnpolledNodeId
4
7
TA0403.EPS
LM declares itself as the LAS, then becomes the
LAS. (With this procedure, an LM backs up the
LAS as shown in the following figure.)
• The LM whose value of [V(ST)
⫻
V(TN)] is the
smallest on a segment, with the exception of the
current LAS, requests the LAS on the same segment
to transfer the right of being the LAS, then becomes
the LAS.
LM
Node address:
0x15
SlotTime = 5
LM
Node address:
0x16
SlotTime = 5
Node address: 0x14
SlotTime = 5
Basic device
Node address:
0xF1
Basic device
Node address:
0xF2
Basic device
Node address:
0xF3
Basic device
Node address:
0xF4
LAS
LAS
In the event that the current LAS in
this segment (node address 0x14)
fails, the LM with the address of 0x15
takes its place to become the LAS.
LM
FA0402.EPS
Figure A4.2 Backup of LAS